CN/ EN

RO-215 Ruthenium Oxide Temperature Sensor

RO-215 Ruthenium Oxide Temperature Sensor

Scientific Instruments cryogenic sensors. The RO-215 ruthenium oxide sensors are thick-film resistors following a single resistance-temperature curve. They deliver excellent performance in magnetic field environments. The RO-215 features similar physical specifications with higher calibration accuracy and reproducibility better than 20mK.

RO-215 Ruthenium Oxide Temperature Sensor Overview

Scientific Instruments Cryogenic SensorsThe RO-215 ruthenium oxide sensors are thick-film resistors that follow a unified resistance-temperature curve and exhibit outstanding performance under magnetic field conditions. The RO-215 shares similar physical dimensions while boasting higher calibration accuracy and expected repeatability superior to 20mK.

Accuracy Grade of RO-215 Ruthenium Oxide Ultra-Low Temperature Sensors

Grade A:±0.1K (2K~50K)±0.75K (50K~100K)

Grade B:±0.2K (2K~50K)±1K (50K~100K)

Grade C:±0.2K (2K~50K)±1.5K (50K~100K)

Grade D:±0.3K (2K~50K)±3K (50K~100K)

Uncalibrated:±0.3K (2K~50K)

Two-Lead Options

36 AWG stranded copper wire, Teflon insulation36 AWG phosphor bronze wire, polyimide bonded insulation (Recommended)32 AWG phosphor bronze wire, polyimide bonded insulation30 AWG phosphor bronze wire, polyimide bonded insulation

Four-Lead Options

36 AWG stranded copper wire, Teflon insulation36 AWG phosphor bronze wire, polyimide bonded insulation (Recommended)32 AWG phosphor bronze wire, polyimide bonded insulation

Teflon jackets are available in lengths ranging from 6 inches to 15 feet.


RO-215 Ruthenium Oxide Temperature Sensor Technical Parameter

Parameter

Model
 RO-215
Range 
2.0K to 100K
Excitation 
10uA
Repeatability 
+/- 20mK @ 4.2K
Used in magnetic field
 No MR for B<2T; negligible positive  MR for B>2T
Packaging method
 Copper Can, Bobbin, Direct FoC (film-on-ceramic)
Interchangeability
Yes
Calibration options
Yes, +/- 30mK accuracy @ 4.2K
Chip size [mil] 
177 x 80 x 15
Chip size [mm]
 4.5 x 2.03 x 0.38
Technology
RuO₂ Thick-Film Custom Ink, Direct Print Glaze, Remote Bond Pads to Reduce Heat Impact on Thin Films

Magnetic field at 4.2 K:

Model 
2T
8T
RO-215
 0.01K
 0.1K

RO-215 Ruthenium Oxide Temperature Sensor Basic Configuration

Semiconductor
IC
Wafer

recommend