CN/ EN

Temperature controller

Temperature controller

The "Kelvinion" from MultiFields is a powerful cryogenic temperature controller. The Kelvinion is a powerful cryogenic thermostat that includes two independent high-precision temperature measurement channels (RTD and Diode type thermometers are supported) and two high-power PID outputs of up to 100W+50W, as well as two relay outputs and two analogue output channels. Kelvinion cryostat is a great tool for cryogenic research.

Temperature controller Overview

The "Kelvinion" from MultiFields is a powerful cryogenic temperature controller. The Kelvinion is a powerful cryogenic thermostat that includes two independent high-precision temperature measurement channels (RTD and Diode type thermometers are supported) and two high-power PID outputs of up to 100W+50W, as well as two relay outputs and two analogue output channels. Kelvinion cryostat is a great tool for cryogenic research.


Features:
- Temperature measurement and control down to 300 mK ;.
- 8 independent temperature measurement channels with resolutions up to 0.1 mK (24-bit ADC) ;.
- Automatic adjustment of thermometer excitation current for measurement accuracy and heat generation;
- Supports 1000+ user-defined indexing tables;
- 2-way PID output channel power 100 W + 50 W;
- Support 2-channel relay and 2-channel analogue signal output;
- Temperature rise and fall rate can be set;
- PID parameters can be switched according to the zone table in different temperature ranges (Zone mode);
- Support USB (serial port), network port, GPIB communication;
- Has a heater short circuit and open circuit detection, set value and temperature limits and other safety protection measures.

Temperature controller Technical Parameter


Kelvinion Temperature controller product parameters:

Input
Input channel8
IsolationThe sensor input channel is electrically isolated from the control circuit
Analog-to-digital conversion
24 bits
Update rate
Ten times per second
User curve
More than 1,000 curves (with 400 points on each curve)
Filtering
Kalman filter
Input parameters
Sensor type
Diode type/resistance type
Measurement type
Four-line method
MotivationConstant amplitude alternating direction current excitation (resistive type)
Support sensors
Diode: Si, GaAlAs;
Resistive type: 100 Ω & 1000 Ω Pt, Ge, Carbon-Glass, Cernox®, and Rox™
NTC- Input Range

0~10

Ω

0~30

Ω

0~100

Ω

0~300

Ω

0~1

0~3

0~10

0~30

0~100

NTC- Excitation Current1 mA
0.3mA
0.1mA
30µA 
10µA 
3µA
1 µA 
0.3µA
0.1 µA
NTC- Measurement Resolution
0.15 mΩ
0.45 mΩ
1.5 mΩ
4.5 mΩ
15 mΩ
+0.02‰
of rdg
45 mΩ
+0.02‰
of rdg
150 mΩ
+0.02‰
of rdg
450 mΩ
+0.02‰
of rdg
1.5 Ω
+0.05‰
of rdg
NTC- Accuracy
8 mΩ
20 mΩ
50 mΩ
120 mΩ
0.5 Ω
+0.02‰
of rdg
1.2 Ω
+0.02‰
of rdg
5 Ω
+0.02‰
of rdg
15 Ω
+0.02‰
of rdg
15 Ω
+0.05‰
of rdg
Temperature control
Temperature control channel
2
PID tuning
PID parameter self-tuning
PID parameters
P (proportion): 0-1000 Set the resolution to 0.01
I (integral): 0-1000 Set the resolution to 0.01
D (differential): 0-200% Set the resolution to 0.01%
Manual power setting: 0-100% Set the resolution to 0.01%
Zone ModeThe PID and power range can be independently set for the five temperature intervals
Set the rate of temperature change
0.1 K/min ~ 20 K/min
Output Channel 1
25 Ω heater
50 Ω heater
TypeAdjustable DC current output
Digital-to-analog conversion16 bits
Power100W50W
Current2A1A
Pressure limiting50V
Heater resistance10 to 100 Ω
Power rangeThree
Output Channel 2
25 Ω heater
50 Ω heater
TypeAdjustable DC current output
Digital-to-analog conversion16 bits
Power50W
25W
Current1.4A1A
Pressure limiting50V
Heater resistance10 to 100 Ω
Power rangeThree
General
Relay output
Two
Analog output
 Two, ± 10V, 16-bit
Communication
Serial port (USB) : USB-TypeB port, baud rate 115200
GPIB: IEEE488.2 protocol, supports setting addresses
LAN: TCP/IP protocol, 10M/100M adaptive rate, supports setting IP addresses and port numbers
Display5.0-inch touch screen; Resolution: 1280 x 720
Storage space16M, direct connection without driver for PC
Safety protectionHeater short circuit & open circuit protection; Temperature over-limit protection
Size430(W) * 88.9(H) * 358(L) (unit: mm)


Temperature controller Basic Configuration

Semiconductor
IC
Wafer

recommend